一、Technical Description
This product adopts the principle of proton exchange membrane water electrolysis. It removes moisture from controlled environments by electrolyzing water molecules in the air. Suitable for locations with stringent storage environment requirements, it reduces the risk of stored materials deteriorating due to moisture.
- Features:
- Continuous and stable humidity control can be achieved simply by connecting a low-voltage DC power supply;
- Wide operating temperature range (-10～50℃);
- No moving parts, silent operation and maintenance-free.
二、. Product Model and Parameters
| Model | CS-1J | CS–2J | CS–3M | CS–3J | CS–5J | CS–7J | CS-10J | CS–20J |
| water removal capacity（g/day） | 1 | 2 | 2.9 | 4 | 8 | 16 | 29 | 120 |
| Applicable Volum（m3） | ~0.125 | ~0.25 | ~0.35 | ~0.5 | ~1 | ~2 | ~4 | ~16 |
| Voltage（V） | 3V DC | |||||||
| Power（W） | 0.55 | 0.95 | 1.3 | 1.8 | 3.2 | 6 | 12 | 45 |
| Drain Hole Size （mm x mm） | 25×20 | 35×25 | 35×35 | 55×30 | 55×55 | 75×75 | 105×105 | 205×205 |
| Overall Dimensions（mm×mm×mm） | 50×55×20 | 50×60×20 | 60×65×20 | 60×75×20 | 85×90×20 | 100×110×20 | 155×160×20 | 310×320×20 |
| Operating Temperature（℃） | -10~50 | |||||||
* Initial performance under environment of 30℃ @ 60%RH
**Applicable volume is defined for sealed, moisture-impermeable containers, and may vary depending on container material, sealing condition and target humidity requirement.
*** Excluding terminals
三、Instructions for Use
Connect the positive power wire to the connector marked “+” and the negative power wire to the connector marked “-” on the humidity controller, then switch on the power for operation.
四、Measured Data
五、 Application Modes and Scenarios
| Dehumidification Mode | Application Scenarios |
 | >Humidity Control for Cultural Collections >Defogging for Lamps and Lenses >Refrigerator Humidity Control |
| Humidification Mod | Application Scenarios |
 | >Humidity Control for Cultural Collections >Refrigerator Humidity Control |
六、Reference Drawings of Other Product Models
